|
- Should I undercoat - Jeep Wrangler Forum
For application, warming the product improves sprayability Avoid rubberized undercoating, as it can trap rust An alternative old-school method is used motor oil mixed with kerosene More permanent options include Waxoyl Hard Wax and Cosmoline RP-342 Jeep Wrangler Forum provides answers from our community and over 22 other related forums
- Undercoating - Jeep Wrangler Forum
Undercoating has several significant downsides The primary ones are: Trapping moisture between the metal and the undercoating, promoting rust Plugging drain holes causing all sorts of issues Undercoating on modern cars is generally unnecessary Galvanized steel and factory rustproofing is sufficient They would be IF fiat used them on the JK
- Mastershield Undercoating Cure Time | Jeep Wrangler Forum
Mastershield Undercoating Cure Time Jump to Latest 7 7K views 4 replies 3 participants last post by marslim Oct 29, 2014 B
- RHINO undercoating yea or nay? - Jeep Wrangler Forum
The original poster was asking if Rhino undercoating is a good idea to prevent rust While Rhino liner can work if applied correctly, some users recommend against rubberized undercoating as it can seal in moisture and promote rust Alternatives like Fluid Film, NHOU, Wool Wax, and Crown are suggested as better options for rust prevention
- Undercoat or not? - Jeep Wrangler Forum
The ziebart undercoating is the trap stuff kind if you go to line x they have a tar type undercoating that works well living in the rust belt i undercoat everything and run it thru the wash as much as possible between that and spraying acf50 underneath in the summertime on the non undercoated parts it stays pretty clean down there
- is undercoating worth it? - Jeep Wrangler Forum
Whether undercoating is worth it for occasional beach driving is debated Some users advise against dealer undercoating, suggesting it's overpriced and poorly applied Instead, they recommend DIY solutions like Rustoleum reformer to neutralize rust, followed by a protective spray Others suggest products like Amsoil HD Metal Protector or Krown
- Undercoating - Jeep Wrangler Forum
I'm thinking about undercoating and am looking for advice The underside is exceptionally clean with very little rust (90%+ factory paint) My question is this, Do I only need to wire brush where rust flaking is present or scuff entire frame floor pan area for undercoat to adhere? Thanks in advance for your time
- Undercoating, protection, is it worth it? - Jeep Wrangler Forum
Undercoating, protection, is it worth it? Jump to Latest 1 7K views 5 replies 6 participants last post by Pmryall Feb 5, 2015 Loki9 Discussion starter
|
|
|