|
- Vectric Customer - Index page
Forum for users of Vectric products
- Changing safe z height - Talk ShopBot
In VCarve Pro v3 1, is there a way to change the safe z height after the material is defined? I have one particular tool path that might be trouble and I wanted to add a little height to the safe z but it’s not obvious to me if there is a way to do it Tom
- How do I carve a log in relief in a dish? - Vectric Customer
I have managed to convert it to vectors and can do all sorts of fun stuff but I cannot figure out how to get it to carve in relief in a dish
- ArtCAM vs Aspire - Talk ShopBot
The guys at vectric worked for Delcam Delcam cost around $7500 + support Aspire is much easier to use and support is free Don 01-18-2014, 02:19 PM #3 phil_o Senior Member
- Z height of imported components - Vectric Customer
The reason is when it comes to models, Vectric is basically a raster system Think pixels with shades of gray to control depth I could be wrong about this, but typically the max number of shades of gray is 256 So mapping heights depths to shades of gray is granular Vectric software is not designed to produce precise mechanical parts
- How to cut? - Page 2 - Vectric Customer
Hello, I have watched several videos now on how to design in Vectric I have the design portion figured out enough to move along I followed along with the tuto
- Aspire 4. 0 and the new drag knife gadget - Talk ShopBot
The guys at Vectric are releasing their new versions I was sent the new drag knife gadget to play with and test today The tool works great and all within the cam software Below are some screen shots
- Drag Knife Tutorial - Talk ShopBot
In the Vectric software that is a good idea I don't know of any other technique for checkingthis Typically, if you are creating the artwork to be used with the drag knife, you would consider this from the very beginning If you have traced an image or purchased your file, you will need to take the time to become familiar with the level of detail in the drawing This would be something you
|
|
|