|
- Exhaust Manifolds | Warped - RAM FORUM
I see warped 5 7 HEMI exhaust manifolds all the time Here are a few pics of the last set I milled from a 2004 DR that I bought As you can see in the pics one of the ports on the end is flat and the other end of one manifold has an 1 8" gap showing light and the other had a 3 16" gap View attachment 191584 View attachment 191583 View
- Exhaust Manifolds | Warped | Page 17 - ramforum. com
Broken or warped manifolds aren't a new problem,lol My Dad used to braze up FE Ford manifolds alot back in the 60's 70's as they were famous for cracking on 352 and 390 Fords As long as he had most of the pieces he could usually glob them back together enough they'd live for a few years
- warped rotor under 20 - RAM FORUM
One big contributing factor to warped rotors is incorrect lug nut torque Well mine still has the original tires and the dealer has been the only one to ever remove them for rotation so if they were improperly torqued it was either from the factory or the dealer
- Warped exhaust manifolds - RAM FORUM
I’m sure if I guy went through the old threads enough I could find the answer to this but the threads seem voluminous Cast iron exhaust manifolds have always been subject to warping as long as I can remember I got an exhaust tic from one in my first car, a 64 Sport Fury in the late 60s A
- BBK Headers - RAM FORUM
Exhaust Manifolds | Warped I'm well-aware that the 5 7L HEMI has a fairly common issue surrounding the exhaust manifold bolts, causing the "HEMI tick" About 10 days ago, I noticed my truck had a tapping noise when cold-started I assumed that this was the infamous HEMI tick and honestly didn't give it much thought It
- Exhaust Manifolds | Warped | Page 7 - RAM FORUM
The fix is to belt sand the already warped ones to where they're flat and put them back in, with new gaskets and hardware The manifolds only warp once I had both sides done on my truck by an independent shop It's been good for the last two years and 40k miles Interesting so basically they will just warp again?
- Blown Head Gasket or Warped Head??? - RAM FORUM
Having a warped head or blown head gasket shouldn't cause a blockage like this Pull the water pump and make sure the inlet and outlet aren't blocked, and that the impeller is ok Most of the water pumps these days have plastic impellers that can easily break apart
- Warped Bed Rail Caps - RAM FORUM
Hello, I have a 2016 1500 RT, I came out and found the drivers side rail cap had warped up over an inch high by 3-4 inched long Nothing in the bed and the vinyl cover side clamps doesn't touch it Also it's never been in heat over 95 deg Anyone else experienced this or have a reason why
|
|
|