- MODEL SR830
GENERAL Interfaces Preamp Power Power Dimensions Weight Warranty 4 1 2 digit LED display with 40 segment LED bar graph X, R, X Noise, Aux Input 1 or 2 The display can also be any of these quantities divided by Aux Input 1 or 2 4 1 2 digit LED display with 40 segment LED bar graph Y, q, Y Noise, Aux Input 3 or 4
- Rubidium Frequency Standard - FS725
The FS725 integrates a rubidium oscillator (SRS model PRS10), a low noise universal AC power supply, and distribution amplifiers in a compact half-width 2U chassis It provides stable and reliable performance, with an estimated 20 year aging of less than 5 × 10 -9 and a demonstrated rubidium oscillator MTBF of over 200,000 hours The FS725 is an ideal instrument for calibration and R D
- DG535 1-45a - thinksrs. com
Display: 20 character back-lit LCD Dimensions: 14" x 8 5" x 4 75" Weight: 10 lbs Power: 70 Watts from 100, 120, 220, or 240 Vac, 50 60 Hz Warranty: One year parts and labor on materials and workmanship
- SR850 - Lock In Amplifier
The SR850 is a digital lock-in amplifier based on an innovative DSP (Digital Signal Processing) architecture The SR850 boasts a number of significant performance advantages over traditional lock-in amplifiers —higher dynamic reserve, lower drift, lower distortion, and dramatically higher phase resolution
- Low Noise Current Preamplifier - SR570
The SR570 is a low-noise current preamplifier capable of current gains as large as 1 pA V High gain and bandwidth, low noise, and many convenient features make the SR570 ideal for a variety of photonic, low temperature and other measurements
- PTC10 Programmable Temperature Controller
Power 10 A, 88 to 132 VAC or 176 to 264 VAC, 47 to 63 Hz or DC Dimensions 17" wide × 5" tall × 18" deep Weight 25 lbs Warranty One year parts and labor on defects in material and workmanship PTC320 thermistor, diode, and RTD reader Inputs One input for 2-wire or 4-wire thermistor, diode, or RTD
- MODEL SR530 - thinksrs. com
LINE VOLTAGE SELECTION The SR530 operates from a 100V, 120V, 220V, or 240V nominal ac power source having a line frequency of 50 or 60 Hz Before connecting the power cord to a power source, verify that the LINE VOLTAGE SELECTOR card, located in the rear panel fuse holder, is set so that the correct ac input voltage value is visible
- RGAm. pdf - thinksrs. com
Models RGA100, RGA200, and RGA300 Residual Gas Analyzer 1290-D Reamwood Ave Sunnyvale, CA 94089 408-744-9040 · 408-744-9049 fax info@thinkSRS com · www thinkSRS com
|