|
- Gen5: Cutting off the right side of the slide lock release
Cutting off the right side slide release from the ambi part eliminates that friction, which is most prevalent at the "wall" of the trigger pull You can actually see the right side of the frame push out a little as the trigger pull completes and the trigger bar rubs against the ambi release
- 2011 shielded thumb safety recommendation - Brian Enoss Forums
My recent experience with a Wilson was disappointing One cracked before I completed installation, the replacement was so spongy that pushing the right hand side wouldn't completely disengage the left side These weren't the shielded ones mind you, but these ambi ones were just MIM'd
- Smithfield (AKA Springfield) Armory Prodigy DS modifications for . . .
The only parts I've changed is the trigger, to an Atlas X-Line long flat trigger, the thumb safety to a wide ambi safety, and the recoil and mainsprings Edited February 9, 2024 by 392heminut
- Pros and Cons of Ambi Thumb Safety - Brian Enoss Forums
I have an ambi thumb safety on my 1911 right now and it's a pain in the a-- to get out when I want to strip this thing down I was thinking of replacing it with a single sided thumb safety, but before I do I just want to make sure I'm not going to need it Can anyone think of a situation where you would need an ambi safety in competition?
- My Prodigy 5 Build - 1911-style Pistols - Brian Enoss Forums
My 5” Prodigy has run 100% except for an old batch of reloads from last year They run through my Glocks fine but there isn’t quite enough crimp on them to make the Prodigy happy There is an oocassional FTF with these loads Everything else runs like a champ The chamber is a little tighter than my Glocks Mods: Dawson guide rod Wilson High wide ambi thumb safety EGW ignition kit Wilson
- Springfield Pinch-o-Matic (Prodigy) - Brian Enoss Forums
Flipping the ambi safety to off will pinch the palm of my left hand I don’t have this issue with my 1911’s but the 1911’s don’t have the fat grip of the Prodigy
- Remove series 80 plunger and spring only? - Brian Enoss Forums
Hello In an effort to optimize the feel of a series 80 1911 pistol I would like to remove the firing pin block and spring components only The ambi safety in this particular gun is ridiculously stubborn,mim made and ,I don't want to risk damage removing it in an attempt to get access to the othe
- Shadow 2 carry - CZ - Brian Enoss Forums. . . Maku mozo!
Some of the criticisms of the shadow 2 compact was lack of firing pin block and not being a decocker so it was almost perfect And is what makes it a Shadow so now with whatever wisdom this is, they added the firing pin block and ambi decock levers they also changed the optic system which looks like the Nocturne setup direct mount for Holosun K, Vortex CCW and 320 sights
|
|
|