copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
how do i test the orange wire??? | Blue Traxx Forum The CDI box is sending its 12V pulse to the coil, as it should, but the coil is unable to properly transform it Nothing, or an inconsistent blink of the test light, indicates that your ignition coil is not recieving its proper trigger pulse from the other components of the bike's ignition system
Cdi wiring help - Blue Traxx Forum My CDI box has 12 wires and I believe it is a 90-95 also my stator has 7 wires please any help is much appreciated a CDI box wiring diagram with wire description particularly would be awesome Thanks
Yamaha Timberwolf 250 2x4 no spark - Blue Traxx Forum Hi folks -- new to the forum, hoping for some help Trying to get ohms readings for the pickup and stator on my 94 timberwolf… for the stator and the pickup coil Engine cranks fine, but no spark at the plug wire I replaced the ignition coil thinking the primary coil was bad after measuring
BLACKBOX Programmable CDI ECU Ignition Rev Box Anyone heard of BLACKBOX Programmable CDI ECU Ignition Rev Box or used one? Found out today that the addiction has apparently spread from me on to my hubby This morning I needed springs and somehow that moved on to a programmer being over nighted to us
Help? No spark and new stator - Blue Traxx Forum The next day we went to start it No spark what so ever So i Thought Hmm ok the Stator, Got the new one installed it Still no spark Tested the CDI Box on my dad's 2002 Yamaha Warrior his quad started right up So CDI And Stator are just fine i tested the Stator with a Ohm Reader setting on my multi Tester i got all good Readings And i just dont
87 yamaha warrior no spark issue - Blue Traxx Forum Now I know you can't really test a CDI BOX, but i tried the following test just to see the results Multimeter 20k volts: POS to cdi orange wire - NEG to Coil orange wire = (-1 74)- (-1 85) constantly changing volts when cranking engine over If i swap the Multimeter connecters i get a positive reading
1987 Warrior No Spark - Blue Traxx Forum got a 1987 warrior 350, getting no spark out of the ign coil, ive done all the test and everything comes back fine, ive tried different stators, cdi boxes, rectifiers new key switch, and kill switch but i noticed that i would get 35v AC out of the red and brown wire coming from the stator