copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
Forum list | CJ-8 CJ-8 History Production Questions and topics related to the how CJ-8 Scramblers were originally equiped, production information, etc
Holley Sniper EFI install on my 258 - CJ-8 I intended to take a bunch of pictures and make sure I document my experience installing the Sniper on my Scrambler I probably did not get enough pictures or take enough botes, but here goes To start off, I replaced a Holley 4bbl carb mounted on an Offenhauser intake Is it more carb than
No fuel, wont start without priming - CJ-8 OK, last week had a rough night and ended up blowing the fusible link that comes off the solenoid Killed the whole Jeep Went back the next morning and fixed that, and when Jeep fired up I noticed my fuel lines were cracked coming off the filter (stock 1 inlet, 2 outlet) I put new fuel
Anyone here run a 5. 3 with an AX15 behind it? - CJ-8 If you're looking for a smaller 5 speed you may want to consider an NV3500 It's similar in rating to the AX-15 They came behind 4 8L engines It was never offered behind a 5 3 Torque rating is right around 300 ft-lbs so it won't likely stand up to sustained hard abuse behind a 5 3 Bolts right up to the 5 3 with stock parts at very reasonable prices I adapted it to the D300 using a new input
Suspension Upgrade Opinions For A Roughly Original Scrambler - CJ-8 Had Alcan 4" on a CJ 5 loved them rode way better than the Scrambler Neither was shackle reverse As for Sway bars I had disconnects on both The Scrambler I unhooked and rehooked a couple of times unhooked and removed the sway bar The CJ 5 unhooked and rehooked a couple of times, hooked them up and never unhooked again as long as I owned it
Mounting location for emblems | CJ-8 Could someone tell me exactly where the "CJ8" and "Scrambler" emblems (repros sold on this site) were originally located on the body? Did all Scramblers have these, or just certain years and or trim levels? Mine doesn't have any logos on it Thanks, Craig
Are CJ YJ doors the same fit? | CJ-8 Or I use the full fiberglass doors made for a CJ with the glass slider windows But I find I like the YJ TJ half door combo mix better I have considered either manipulating the frame of my soft door upper to fit the contour, or finding TJ uppers for the full soft doors, and seeing if they will mate up to my YJ soft lower
Other OEM Jeep wheel choices for a Scrambler? - CJ-8 Other than CJ's, what other OEM wheels will fit a Scrambler? I'm thinking about putting something small and hwy friendly on, and see lots of take-off set's on craigslist I'm sure the answer is buried somewhere in the forum already, but I couldnt find it Can ya'll tell me what is ok and what is a no-go Some examples
Best Engine Swap? - CJ-8 Toying with the idea of keeping the Scrambler (wife has already agreed) but this will definitely require performing an engine swap to make it long distance at 65 mph and partly to satisfy my need to tinker :D Was considering dropping in a 4 0 fuel injection engine with an automatic