copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
ALERT SERVICE BULLETIN - Cessna 150-152 to the outside of the propeller hub wall 0 375 inches (9 53 mm) from the propeller hub camber forward side surface Remove from service any propeller that has a measured wall thickness less than 0 280 inches (7 11 mm) at a depth of 0 375 inches (9 53 mm) from the propeller hub camber forward side surface B
Service Bulletin 221C - Cessna 150-152 This form must be completed following dye penetrant inspection of propeller per McCauley Service Bulletin 221C See Section II or Section III of Service Bulletin 221C for further details This completed form may be either mailed or telefaxed to McCauley at the following: McCauley Propeller Systems Product Support Department 3535 McCauley Drive
Sensenich 69CK Propeller - Cessna 150-152 Club forums Simply replacing our worn whittled McCauley with another used, but fully dimensional, McCauley made a noticeable difference on our airplane So, an apples to oranges comparison of replacing an old whittled McCauley with a brand new Sensenich doesn't really provide any real useful data when simply comparing MCCauley to Sensenich
C150PC77 - Cessna 150-152 essma illustrated parts catalog MODEL 150 a A150 FIGURE AND UNITS USABLE INDEX ASSY 1234567 CODE MCCAULEY c 161001-
DEPARTMENT OF TRANSPORTATION - Cessna 150-152 Propeller and Propeller Limits 1 McCauley 1A100 MCM 21 lb (-32) Diameter: not over 69 in , not under 67 5 in Static r p m at maximum permissible throttle setting: Not over 2475, not under 2375 No additional tolerance permitted 2 McCauley 1A101 DCM 21 lb (-32) Diameter: not over 69 in , not under 67 in Not over 2600, not under 2500
Aft Spinner Bulkhead for 150M - Cessna 150-152 Club forums The Sensenich and McCauley propellers use different spinners and I'm pretty sure different backplates And Michael is correct The L-M spinners and backplates are very difficult to find, and they are the only models you cannot use a Skull Cap A new backplate for the McCaulley from Cessnaparts [cessnaparts com] is $1,104 48
DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION Propeller and 1 Sensenich 69CK 24 lb (-32) propeller limits Diameter: not over 69 in , not under 67 5 in Static r p m at maximum permissible throttle setting: not over 2470, not under 2320 No additional tolerance permitted 2 McCauley 1A100 MCM 21 lb (-32) Diameter: not over 69 in , not under 67 5 in
DEPARTMENT OF TRANSPORTATION - Cessna 150-152 Propeller and 1 Sensenich 69CK 24 lb (-32) propeller limits Diameter: not over 69 in , not under 67 5 in Static r p m at maximum permissible throttle setting: not over 2470, not under 2320 No additional tolerance permitted 2 McCauley 1A100 MCM 21 lb (-32) Diameter: not over 69 in , not under 67 5 in