copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
Phynix - PHYNIX PHYNIX: Your competent partner for coating thickness and surface measurement In addition to our coating thickness gauges, our portfolio also includes products for surface measurement: from porosity detection and hardness testing through gloss measurement and cross-hatch cutting as well as wall thickness and roughness measurement - the surface
Surfix® EX Surfix® SX: Modern coating thickness gauges - PHYNIX PHYNIX connect, a data transmission program for all modern Windows systems, facilitates the transfer of measured values into Excel Two models are available: the Surfix® SX can be connected to all probes from the PHYNIX probe program
Gauge calibration standards for precise data results - PHYNIX The PHYNIX calibration standards with a thickness range between 10 µm and 10 mm are used to verify and calibrate coating thickness gauges If used for a foil calibration, calibration standards whose thickness are in the range of the measured coating thickness, will increase the measurement accuracy
Application notes - PHYNIX The PHYNIX gauges allow the non-destructive thickness measurement of coatings and use two different methods: the magnetic-inductive and the eddy-current principle
Calibration procedure - PHYNIX This effect that impairs coating thickness measurement can be removed completely by the simple process of calibration Where a geometry change causes a significant difference between field line length and coating thickness, calibration is suitable
Application notes - PHYNIX The Surfix Pro X can be connected to all probes from the PHYNIX probe range Currently the standard probe FN1 5 is used, which works with the magnetic-inductive method according to DIN EN ISO 2178 and the eddy current method according to DIN EN ISO 2360
Standard probes - PHYNIX Standard probes All our standard probes for layer thickness measurement have a high wear resistance measuring pole made of carbide and guarantee a very long service life The probes are designed for a measuring range up to 1,500 μm Measurements are possible with both the magnet-inductive measuring method and the eddy current method: For non-destructive coating thickness measurement on iron