copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
tfs433c. doc 05 96 - vectron. com The maximum attenuation in the pass band PB2 is defined as the insertion loss ae The nominal frequency fN is fixed at 845,76 MHz without any tolerance or limit The values of absolute attenuation aabs are guaranteed for the whole operating temperature range The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme
Note Crystal Glo - Microchip Shunt Capacitance: A parameter associated with a quartz crystal unit, used to identify the capacitance resulting from the presence of the electrodes plus stray capacitance associated with the holder Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http: www vectron com
Reducing Power Consumption on LVPECL XOs VCXOs. doc The 240 ohm termination scheme is commonly used at Vectron and should be acceptable for short distance applications, 2-3 inches of FR4 trace - even longer may be possible but has not been evaluated
TX-280_(12-9-08)_DF. indd - vectron. com Vectron International has introduced a series of surface mount, Temperature Compensated Crystal Oscillators (TCXO) available in The TX-280 surface mount TCXO’s can be mounted using the standard convection re! ow process
TX-704-0001-20M0. pdf - vectron. com Notes: Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C)
TFS2593A - myorders. vectron. com The maximum attenuation in the pass band is defined as the insertion loss ae The nominal frequency fN is fixed at 2593 MHz without any tolerance or limit The values of absolute attenuation aabs are guaranteed within the operating temperature range OTR The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme
Absolute Pull Range Definition - myorders. vectron. com Introduction Vectron Technologies uses Absolute Pull Range to define the amount of deviation a VCXO can be adjusted about the device’s center frequency, fo This application note defines APR and compares the advantages with alternative terms such as total pull range
Measurement condition - suppliers. vectron. com The reference level for the relative attenuation arel of the TFS 740 is the minimum of the pass band attenuation amin The minimum of the pass band attenuation amin is defined as the insertion loss ae The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3 dB filter attenuation level relative to the insertion loss ae The nominal frequency fN is fixed
VT-700 Website Aug10 2018. indd - customers. vectron. com Vectron’s VT-700 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output or CMOS output, analog temperature compensated oscillator, operating off either a 2 8, 3 0, 3 3 or 5 0 volt supply, hermetically sealed 5x7 ceramic package