copy and paste this google map to your website or blog!
Press copy button and paste into your blog or website.
(Please switch to 'HTML' mode when posting into your blog. Examples: WordPress Example, Blogger Example)
Input Form:Deal with this potential dealer,buyer,seller,supplier,manufacturer,exporter,importer
(Any information to deal,buy, sell, quote for products or service)
94 Warrior - stator wiring CDI pinout? - Blue Traxx Forum Wired stator to CDI as you directed, still no spark There's nothing on the CDI that looks like a part number; it only says "Made in Taiwan 2014-08" Top row of wires: black, white black, yellow black, white green, yellow Bottom row of wires: green, black, black yellow, black white, orange, brown, blue red
stator and cdi wire colors - Blue Traxx Forum The CDI 3 prong (Y B, W B, G Y) and 2 prong (B, B W) plugs match colors, however the 4 prong plug does not These wires come from stator pickup I have red and white coming from pickup and green and brown from stator, however on the CDI, I have red, blue, yellow and white green
Warrior 350 electrical cdi issues - Blue Traxx Forum After doing all this I realized the cdi is not the original one for the atv It is a no name one with one plug that matches the warrior but a few others that were cut and ran directly to the stator wires which also don't match a 88 stator wiring The atv did run before with the cdi and stator
Help? No spark and new stator - Blue Traxx Forum You can't test the cdi, what you have to do is test everything else and make sure they all test good Have you tested your coil when it's hot and cold you should test your stator hot and cold also It maybe in spec when it's hot but not when cold, and vise versa your cdi is the same in 2002-2004 warriors and 2004-2009 raptor 350
cdi box test? | Blue Traxx Forum cdi box test? Jump to Latest 11K views 2 replies 3 participants last post by dawarriorman Apr 15, 2004
Raptor CDI box | Blue Traxx Forum I have an 01 raptor 660r , the CDI box on it has 3 connectors , 2 of them have more than 4 wires going into it , but 1 just has one wire ( green with a yellow stripe ) going into it Well, it was broken and now there is no connector going into the single wire connector to the CDI box, what does
What would cause a CDI to pop - Blue Traxx Forum yeah shit some of the same problems here, mine the battery was taking a shit, so i was jump starting it, stator was charging at 13 8-14 2, i jumped it maybe 4-5 times then went out oneday and it took like 10min of cranking before it started, was running fine i rode it for like 2 hrs then put it up, 2 days latter wont spark at all im wanting a wire diagram for the stator, coil, cdi, and
Ignition on 660 - Blue Traxx Forum I have 12 volts going to the CDI when key is on I have checked the ground to the CDI, good There is no 12 volts coming from orange wire at CDI with key on or starter engaged All other values are good, coil, pickup,stater I have checked all wires for continuity from all ignition wiring I have replaced CDI with New one DO I have two Bad CDI's?
87 yamaha warrior no spark issue - Blue Traxx Forum Now I know you can't really test a CDI BOX, but i tried the following test just to see the results Multimeter 20k volts: POS to cdi orange wire - NEG to Coil orange wire = (-1 74)-(-1 85) constantly changing volts when cranking engine over If i swap the Multimeter connecters i get a positive reading